Hadco Well Lyte Model Number: [ HadcoWellLyteIL336AL] | MSRP: | $81.50 | | Price: | $52.98 | | You Save: | $28.52 |
| The IL336 composite inground delivers the signature engineering and rugged construction that has made HADCO the leader in landscape lighting. Our patented lamp holder has integral fins to allow the height and angle of the lamp to be adjusted without any mechanical moving parts. | Hadco WellLyte
The IL336 composite inground delivers the signature engineering and rugged construction that has made HADCO the leader in landscape lighting. Our patented lamp holder has integral fins to allow the height and angle of the lamp to be adjusted without any mechanical moving parts. | HOUSING: Single-piece PVC tube. Straight cut end allows flush ground mounting, and an accessory lens guard or rock guard may be ordered separately, but is not required. Angled cut end requires the top 3" installed above ground for maximum vertical spot aiming with shielding being provided on three (3) sides. Patented Lamp Holder - Durable silicone rubber lamp holder has integral fins to allow the height and angle of the lamp to be adjusted without any mechanical moving parts. Fixture offers 360° lamp rotation and up to 45° off vertical aiming adjustability, restricted only by the cutoff of the housing. | | LAMPING: 50W maximum PAR36 screw terminal lamp. 20W PAR36 lamp is included with fixture. Lower wattage lamps are acceptable. | | ELECTRICAL ASSEMBLY: Double screw terminal socket. 12 Volt fixture is pre-wired with 3-ft pigtail of 18-2 AWG, 105° C, SPT-1 wire. Low voltage quick connector, catalog #LVC3 included for easy hook-up to the low voltage supply cable, not included. 12 Volt system requires remote transformer, not included. | | WARRANTY: Lifetime limited warranty. | | CERTIFICATIONS: UL Listed to U.S. safety standards for wet locations. cUL Listed to Canadian safety standards for wet locations. Manufactured to ISO 9001:2000 Standards. | | Height : 8" (203mm) | | Width: 5 5/8 (143mm) | | Max. Weight: 3.04 lb | HOUSING: Single-piece PVC tube. Straight cut end allows flush ground mounting, and an accessory lens guard or rock guard may be ordered separately, but is not required. Angled cut end requires the top 3" installed above ground for maximum vertical spot aiming with shielding being provided on three (3) sides. Patented Lamp Holder - Durable silicone rubber lamp holder has integral fins to allow the height and angle of the lamp to be adjusted without any mechanical moving parts. Fixture offers 360° lamp rotation and up to 45° off vertical aiming adjustability, restricted only by the cutoff of the housing. | HOUSING: Single-piece PVC tube. Straight cut end allows flush ground mounting, and an accessory lens guard or rock guard may be ordered separately, but is not required. Angled cut end requires the top 3" installed above ground for maximum vertical spot aiming with shielding being provided on three (3) sides. Patented Lamp Holder - Durable silicone rubber lamp holder has integral fins to allow the height and angle of the lamp to be adjusted without any mechanical moving parts. Fixture offers 360° lamp rotation and up to 45° off vertical aiming adjustability, restricted only by the cutoff of the housing. | | LAMPING: 50W maximum PAR36 screw terminal lamp. 20W PAR36 lamp is included with fixture. Lower wattage lamps are acceptable. | | ELECTRICAL ASSEMBLY: Double screw terminal socket. 12 Volt fixture is pre-wired with 3-ft pigtail of 18-2 AWG, 105° C, SPT-1 wire. Low voltage quick connector, catalog #LVC3 included for easy hook-up to the low voltage supply cable, not included. 12 Volt system requires remote transformer, not included. | | WARRANTY: Lifetime limited warranty. | | CERTIFICATIONS: UL Listed to U.S. safety standards for wet locations. cUL Listed to Canadian safety standards for wet locations. Manufactured to ISO 9001:2000 Standards. | | Height : 8" (203mm) | | Width: 5 5/8 (143mm) | | Max. Weight: 3.04 lb | | HOUSING: Single-piece PVC tube. Straight cut end allows flush ground mounting, and an accessory lens guard or rock guard may be ordered separately, but is not required. Angled cut end requires the top 3" installed above ground for maximum vertical spot aiming with shielding being provided on three (3) sides. Patented Lamp Holder - Durable silicone rubber lamp holder has integral fins to allow the height and angle of the lamp to be adjusted without any mechanical moving parts. Fixture offers 360° lamp rotation and up to 45° off vertical aiming adjustability, restricted only by the cutoff of the housing. | | LAMPING: 50W maximum PAR36 screw terminal lamp. 20W PAR36 lamp is included with fixture. Lower wattage lamps are acceptable. | | ELECTRICAL ASSEMBLY: Double screw terminal socket. 12 Volt fixture is pre-wired with 3-ft pigtail of 18-2 AWG, 105° C, SPT-1 wire. Low voltage quick connector, catalog #LVC3 included for easy hook-up to the low voltage supply cable, not included. 12 Volt system requires remote transformer, not included. | | WARRANTY: Lifetime limited warranty. | | CERTIFICATIONS: UL Listed to U.S. safety standards for wet locations. cUL Listed to Canadian safety standards for wet locations. Manufactured to ISO 9001:2000 Standards. | | Height : 8" (203mm) | | Width: 5 5/8 (143mm) | | Max. Weight: 3.04 lb | LAMPING: 50W maximum PAR36 screw terminal lamp. 20W PAR36 lamp is included with fixture. Lower wattage lamps are acceptable. | LAMPING: 50W maximum PAR36 screw terminal lamp. 20W PAR36 lamp is included with fixture. Lower wattage lamps are acceptable. | | ELECTRICAL ASSEMBLY: Double screw terminal socket. 12 Volt fixture is pre-wired with 3-ft pigtail of 18-2 AWG, 105° C, SPT-1 wire. Low voltage quick connector, catalog #LVC3 included for easy hook-up to the low voltage supply cable, not included. 12 Volt system requires remote transformer, not included. | | WARRANTY: Lifetime limited warranty. | | CERTIFICATIONS: UL Listed to U.S. safety standards for wet locations. cUL Listed to Canadian safety standards for wet locations. Manufactured to ISO 9001:2000 Standards. | | Height : 8" (203mm) | | Width: 5 5/8 (143mm) | | Max. Weight: 3.04 lb | | HOUSING: Single-piece PVC tube. Straight cut end allows flush ground mounting, and an accessory lens guard or rock guard may be ordered separately, but is not required. Angled cut end requires the top 3" installed above ground for maximum vertical spot aiming with shielding being provided on three (3) sides. Patented Lamp Holder - Durable silicone rubber lamp holder has integral fins to allow the height and angle of the lamp to be adjusted without any mechanical moving parts. Fixture offers 360° lamp rotation and up to 45° off vertical aiming adjustability, restricted only by the cutoff of the housing. | | LAMPING: 50W maximum PAR36 screw terminal lamp. 20W PAR36 lamp is included with fixture. Lower wattage lamps are acceptable. | | ELECTRICAL ASSEMBLY: Double screw terminal socket. 12 Volt fixture is pre-wired with 3-ft pigtail of 18-2 AWG, 105° C, SPT-1 wire. Low voltage quick connector, catalog #LVC3 included for easy hook-up to the low voltage supply cable, not included. 12 Volt system requires remote transformer, not included. | | WARRANTY: Lifetime limited warranty. | | CERTIFICATIONS: UL Listed to U.S. safety standards for wet locations. cUL Listed to Canadian safety standards for wet locations. Manufactured to ISO 9001:2000 Standards. | | Height : 8" (203mm) | | Width: 5 5/8 (143mm) | | Max. Weight: 3.04 lb | ELECTRICAL ASSEMBLY: Double screw terminal socket. 12 Volt fixture is pre-wired with 3-ft pigtail of 18-2 AWG, 105° C, SPT-1 wire. Low voltage quick connector, catalog #LVC3 included for easy hook-up to the low voltage supply cable, not included. 12 Volt system requires remote transformer, not included. WARRANTY: Lifetime limited warranty. CERTIFICATIONS: UL Listed to U.S. safety standards for wet locations. cUL Listed to Canadian safety standards for wet locations. Manufactured to ISO 9001:2000 Standards. | Height : 8" (203mm) | | Width: 5 5/8 (143mm) | | Max. Weight: 3.04 lb | Height : 8" (203mm) Width: 5 5/8 (143mm) Max. Weight: 3.04 lb WE SHIP FAST! |
